![]() ![]() This is what I did to replace the old controller. ![]() DMD402A Drivers, now has MPC-6585 Controller that boots up on the PAD04A screen as V5.0.7 I will outline my machine details and problem below. MPC 6585 CO2 LASER CONTROLLER PCUnfortunately I also don't have the old PC with the old 6515 config as I may have been able to get some of the information from that, so essentially I am starting from scratch. Now I have been able to remove the old controller and replace it with the MPC-6585 and identifying the connections was relatively easy, but I now come to the Config file using LaserCut 6.1. I thought this would be the easier process, seeing as a SofDog was not needed for that controller but it would seem I was wrong. After digging it out and checking it and discovering the SoftDog missing, I decided, rather than replace the SoftDog I would purchase the MPC-6585 to replace the old controller. What I have is one of the cheap Chinese 40W C02 lasers, X, Y and Z Axis that had a Leetro MPC6515 originally installed, I think purchased back about 2007. Prior to any of the following I checked the laser to see if it was still working by using a job that was still sitting in the controller memory and it worked great. I have not used this machine for many years as it has been stored after moving premises and on getting it out I find I had lost the SoftDog. I have posted this same request for help on another forum and have not had any response so I am hoping I may be able to get some help or at least point me in the right direction from here. If you like it, please send us inquiry or contact with us for more detail information. ![]() Whatsapp: 0086-18769963716 Skype: destinytrading Contacts : Legend Wu / Sales Director Support large format vision, mark point visual cutting and projection cutting and other processing methods Support dual-head asynchronous processing ħ. ![]() Support dual-head electric mutual shift control and super-format split cutting processing Ħ. Support 4 OC gate outputs, can directly drive 5V / 24 relay ĥ. MPC 6585 CO2 LASER CONTROLLER SERIALSupports one extended serial port, which can communicate with EPLC-400, wireless handheld devices (BWK201R, BWK301R), and other devices with RS232 standard interface ģ. Support up to 4 servo / stepper motor control Ģ. 4 universal photoelectric isolation inputs, compatible with 5V / 12V / 24V logic level ġ. 4 general-purpose opto-isolated OC gate outputs, with a maximum driving capacity of 300mA (with freewheel protection), can directly drive 24V / 5V DC relaysħ. Linear / circular / B-spline interpolation accuracy +/- 0.5 pulse Ħ. The maximum transmission rate of the network cable is 100M, and the maximum transmission distance is 200M ĥ. USB maximum transfer rate is 12M, the longest distance is 5 meters Ĥ. 4-way motor interface, output maximum 400KHZ frequency drive capacity 20mA, common anode interface ģ. The human-machine operating system based on the 5-inch color screen has a more friendly operation interface and more powerful functions. The control system has better hardware stability and better resistance to high voltage and static electricity. RDC6445G system is the latest generation of laser engraving / cutting control system developed by Ruida Technology. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |